RØDE S1-B Vocal Condenser Microphone Black

RØDE The S1 is studio quality that is also suitable for live use.

This condenser microphone from Australian RØDE is equipped with a 3/4" diaphragm, which is to be fed with phantom power. The power supply causes the diaphragm to vibrate and helps you to achieve a detailed sound from the microphone.
 

Less risk of feed


This is a kidney microphone that only picks up sounds in front of the mic and not from the side or behind. This reduces the risk of feed into your speakers if you use the S1-B on stage.
In addition, RØDE has built a fine steel filter into the head of the S1-B to pick up wind, breath and hand noise, whether you're on stage or in the studio.

Remember that RØDE offers a 10-year warranty on the S1-B if you register your product online at RØDE.


 


RØDE S1-B

3 Reviews
Special item: Ships in 5-8 workdays
GLS - Pick-up-point €0
GLS - Home Delivery €10
GLS - Company Delivery €10

Read more about delivery

Delivery from €10,-  See delivery options

Matching accessories:

  • Rich in details
  • Must be connected to phantom power
  • New microphone
  • Available in black and silver


RØDE S1-B Vocal Condenser Microphone Black

RØDE The S1 is studio quality that is also suitable for live use.

This condenser microphone from Australian RØDE is equipped with a 3/4" diaphragm, which is to be fed with phantom power. The power supply causes the diaphragm to vibrate and helps you to achieve a detailed sound from the microphone.
 

Less risk of feed


This is a kidney microphone that only picks up sounds in front of the mic and not from the side or behind. This reduces the risk of feed into your speakers if you use the S1-B on stage.
In addition, RØDE has built a fine steel filter into the head of the S1-B to pick up wind, breath and hand noise, whether you're on stage or in the studio.

Remember that RØDE offers a 10-year warranty on the S1-B if you register your product online at RØDE.


 



Model/Product no.: SCS-S1-B
GTIN 698813000180
Weight (kg) 0,5
Acoustic Principle Pressure gradient
Frequency Range 20Hz ~ 20,000Hz
Nominal Impedance 50
Maximum Output +12.5dBu (@ 1% THD into 1k)
Maximum SPL  151dB (@ 1kHz, 1% THD into 1k load)
Power Req. 48V Phantom Power
Output Connection 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
Net Weight 308g
Directional Pattern Super-Cardioid
Directional Pattern -46dB ±2dB re 1V/Pa (5mV @ 94 dB SPL) @ 1kHz
Equivalent Noise 18dBA SPL (A - weighted per IEC651)
Dynamic Range 132dB (per IEC651)
Signal/Noise 75dB SPL (A - weighted per IEC651)
Dimensions Length - 183mm
Diameter - 52mm
Shipping Weight 580g


/upload_dir/templates/SSXL2024_new_design_september