Audio-Technica ATM450
Description:
Audio-Technica ATM450 Microphone
The Audio-Technica ATM450 is a cardioid condenser microphone that is suitable for instruments. The microphone comes with a flexible holder, which isolates against shocks and sudden movements.
10 dB pad + 80 Hz hi-pass filter
The Audio-Technica ATM450 has a switchable pad of 10 dB, which reduces the sensitivity of the microphone and provides higher SPL capability. An 80 Hz hi-pass filter allows you to use a frequency response of 40 - 20,000 Hz.
Innovative design
The Audio-Technica ATM450 features an innovative design with the sound capsule located on the side of the microphone, making it ideal for various mounting options.
|
Description:
Audio-Technica ATM450 Microphone
The Audio-Technica ATM450 is a cardioid condenser microphone that is suitable for instruments. The microphone comes with a flexible holder, which isolates against shocks and sudden movements.
10 dB pad + 80 Hz hi-pass filter
The Audio-Technica ATM450 has a switchable pad of 10 dB, which reduces the sensitivity of the microphone and provides higher SPL capability. An 80 Hz hi-pass filter allows you to use a frequency response of 40 - 20,000 Hz.
Innovative design
The Audio-Technica ATM450 features an innovative design with the sound capsule located on the side of the microphone, making it ideal for various mounting options.
Specifications:
Model/Product no.: | AUD-ATM450 |
EAN: | 042005144679 |
Type | Microphone |
Specifications
Element: |
Fixed-charge back plate permanently polarized condenser |
Polar Pattern: |
Cardioid |
Frequency Response: |
40-20,000 Hz |
Low Frequency Roll Off: |
80 Hz, 18 dB/octave |
Open Circuit Sensitivity: |
41 dB (8.9 mV) re 1V at 1 Pa |
Impedance: |
200 ohms |
Maximum Input Sound Level: |
152 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range: |
127 dB, 1 kHz at Max SPL |
Signal to Noise Ratio: |
69 dB, 1 kHz at 1 Pa |
Phantom Power Requirements: |
11-52V DC, 3.5 mA typical |
Weight: |
98 g (3.5 oz) |
Dimensions: |
126.9 mm (5.00") long, 21.0 mm (0.83") diameter |
Output Connector: |
Integral 3-pin XLRM-type |
Accessories: |
AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch |